The contemporary styled Burley Environ 4247 will bring any modern fireplace to life with it's sleek, Brushed Steel fascia frame and cool pebble effect fuel bed. Subject to a minimum room size and an air vent being fitted, this stylish flueless gas fire can be fitted into almost any room in your home.
Designed for installation into a standard fireplace opening, the Environ 4247 boasts a real flame set behind a glass panel and benefits from not requiring a chimney or flue. The state-of-the-art technology used incorporates a catalytic converter which converts the carbon monoxide created during the combustion process into carbon dioxide (which is harmless and is present in fresh air). Burley has NEVER had a catalytic converter fail or need replacing.
A flueless gas fire can be fitted in minutes rather than several hours. It is an extremely simple and problem free operation provided the Gas Safe registered fitter follows the installation instructions. If it is to go in an open chimney, then the flue must be blocked. Apart from that the fire just needs connecting and testing, and a 100cm² air vent fitting.
When fitting a flueless fire such as the Burley Environ 4247, it does not need to be sealed to the fireplace opening and flueless gas fires do not have to be installed on an outside wall. As no flue is required, thousands of pounds can be saved by not building a new chimney or restoring a condemned one. All Environ flueless gas fires are supplied with a cavity box.
With all the heat entering the room, the Environ 4247 boast an excellent efficiency rating and has a maximum output of 2.5kW. A minimum room size of 30m³ (length x width x height) and as per Building Regulations Part J, an air vent which provides not less than 100cm2 free air must be installed in the room, at least 1 metre away from the fire. A chimney, ceiling or floor vent is not suitable.
Recess requirement of 95mm (3¾") when insetting into a standard, 16" fireplace opening. If inset depth is not available, an optional spacer frame is offered allowing for flush fitting against the back panel.
Choose from standard Manual control with controls discreetly hidden behind the bottom fret drawer. High level Slide with simple, easy to reach operation using a lever on the top side of trim or Remote control for the ultimate in convenience.
Flueless fact sheet here
Download Instructions
(Manufacturers instructions are offered as a guide only and may not always be the latest version)
Key features of the Burley Environ 4247 Flueless Gas Fire can be found below.
| Model | Environ 4247 |
| Heater Type | Gas - Flueless Gas Fire |
| Direct Heat Output | 2.5kW |
| Useful Energy Efficiency | 100% |
| Control | Manual / Slide / Remote |
| Minimum Room Size | 30m³ |
| Air Vent Required | Yes (minimum 100cm²) |
| Thermostat | Yes |
| Catalytic Converter | Yes |
| Fuel Effect | Coal or Pebble |
| Style | Inset (Freestanding using optional spacer) |
| Warranty | 1 Year |
The dimensions (width, height, depth) of the Burley Environ 4247 Flueless Gas Fire are listed here.
| Burley Environ | Width | Height | Depth |
| Overall Dimensions | 518mm
(20½") | 612mm
(24") | 240mm
(9½") |
| Inset Dimensions | 387mm
(15¼") | 551mm
(21¾") | 95mm*
(3¾") |
*Optional spacer frame allows for freestanding installation without the need to inset
Please note: Due to rising freight charges, we are now being forced to charge extra for delivery to certain Scottish postcodes.
Burley flueless gas fires such as the Environ 4247 will be delivered using a Premier courier service. You will be contacted prior to delivery to book-in a suitable date shortly after placing an order.
Current delivery times for the Burley Environ 4247 is approximately 3 working days however, this is dependant on stock levels at time of placing an order. Once an order is placed, we will contact you to advise if there is likely to be any delays on the estimated delivery time.
Returns information
We understand that from time to time some of our customers may change their mind or simply not be pleased with their chosen products once delivered and/or installed. Our returns policy should hopefully help with the process of returning your order in this instance. Please feel free to contact us should you have any further queries.
.jpg)
.jpg)
.jpg)
.jpg)
