With a impressive heat output of up to 3.8kW, the popular Eko Fires 3030 is more than capable that providing any home with a stylish centrepiece that performs as good as it looks! Glorious, open-fronted flames combined with a full-depth fire bed offer the ultimate in realism.
Whether you are looking for a classic, traditional or contemporary styled gas fire, the Eko 3030 can be tailored to suit your preference by combining with a vast array of trim & fret options or with one of Eko Fires exclusive one-piece fascia frames. For added versatility, the Eko 3030 can also be supplied with one of three authentic fuel effect options; Coal, Pebble or Log.
The deeper fuel bed of this full-depth radiant gas fire provides exceptional performance and a class leading flame picture. It is designed to be combined within a fireplace with a standard opening and is suitable for installation in to Class 1 and Class 2 flues (subject to adequate depth available to accommodate the appliance depth).
The 3030 model is supplied as a manual control allowing you to operate the fire using rotary controls at the bottom of the fire. There is also a remote control upgrade available allowing for armchair operation of the flame height once the pilot light has been lit.
A popular control method is offered as standard on the Eko 3035. A Slide Control lever is located at the top, right hand side of the fire and allows for simple operation of the fires on/off and flame height settings without the need to bend right down.
Download Instructions
(Manufacturers instructions are offered as a guide only and may not always be the latest version)
Key features of the Ekofires 3030 / 3035 Gas Fire can be found below.
| Fire Type | Full Depth Radiant |
| Gas Type | Natural Gas |
| Efficiency | 55% |
| Control Type | 3030 - Manual or Remote / 3035 - FingerSlide |
| Fuel Effect | Coal / Pebble / Logs |
| Open or Glass Fronted | Open Fronted |
| Heat Input (Max/Min) Gross | 6.8kW / 3.5kW |
| Heat Output (Max/Min) Gross | 3.8kW / 1.9kW |
| Installation | Inset |
| Air Vent Required | Not Normally Required |
| Safety | Oxygen Depletion Sensor / Flame Failure Device |
| Guarantee | 3 Years |
The dimensions (width, height, depth) of the Ekofires 3030 / 3035 Gas Fire are listed here.
| A | B | C | D1 | D2 | E | X | Y | Z |
480mm
(19") | 590mm
(23¼") | 180mm
(7") | 245mm
(9¾") | 375mm
(14¾") | 565mm
(22¼") | 375mm (14¾") Min
450mm (17¾") Max | 540mm (21¼") Min
575mm (22¾") Max | 200mm
(8") |
Please note: Due to rising freight charges, we are now being forced to charge extra for delivery to certain Scottish postcodes.
Standard sized fires such as the Eko 3030 & 3035 will be delivered using a Premier courier service. We will contact you to book-in a suitable delivery date as soon as we're ready to dispatch your item(s). The courier service we use has a service where they will send you a text message on the morning of the delivery to advise on a 1 hour time slot when your item(s) will arrive.
Current delivery times for the Eko 3030 / 3035 Gas Fire is approximately 7-10 days however, this is dependant on stock levels at time of placing an order. Once an order is placed, we will contact you to advise if there is likely to be any delays on the estimated delivery time.
Returns information
We understand that from time to time some of our customers may change their mind or simply not be pleased with their chosen products once delivered and/or installed. Our returns policy should hopefully help with the process of returning your order in this instance. Please feel free to contact us should you have any further queries.
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)