The Burley Perception 4260 flueless gas fire features realistic hand painted pebbles and a solid cast front in brass. A lovely, timeless design that will enhance both traditional and contemporary surroundings and bring your room to life. Being a flueless gas fire, the 4260 does not require a chimney as it incorporates a catalytic converter which converts the fumes into oxygen which then filter out of the fire's vents.
Designed for installation into a standard fireplace opening, the Perception 4260 boasts a real flame set behind a glass panel and benefits from not requiring a chimney or flue. The state-of-the-art technology used incorporates a catalytic converter which converts the carbon monoxide created during the combustion process into carbon dioxide (which is harmless and is present in fresh air). Burley has NEVER had a catalytic converter fail or need replacing.
A flueless gas fire can be fitted in minutes rather than several hours. It is an extremely simple and problem free operation provided the Gas Safe registered fitter follows the installation instructions. If it is to go in an open chimney, then the flue must be blocked. Apart from that the fire just needs connecting and testing, and a 100cm² air vent fitting.
When fitting a flueless fire such as the Burley Perception 4260, it does not need to be sealed to the fireplace opening and flueless gas fires do not have to be installed on an outside wall. As no flue is required, thousands of pounds can be saved by not building a new chimney or restoring a condemned one. All Perception flueless gas fires are supplied with a cavity box.
With all the heat entering the room, the Perception 4260 boast an excellent efficiency rating and has a maximum output of 2.5kW. A minimum room size of 30m³ (length x width x height) and as per Building Regulations Part J, an air vent which provides not less than 100cm2 free air must be installed in the room, at least 1 metre away from the fire. A chimney, ceiling or floor vent is not suitable.
Recess requirement of 95mm (3¾") when insetting into a standard, 16" fireplace opening. If inset depth is not available, an optional spacer frame is offered allowing for flush fitting against the back panel.
Choose from standard Manual control with controls discreetly hidden behind the bottom fret drawer. High level Slide with simple, easy to reach operation using a lever on the top side of trim or Remote control for the ultimate in convenience.
Flueless fact sheet here
Download Instructions
(Manufacturers instructions are offered as a guide only and may not always be the latest version)
Key features of the Burley Perception 4260 Flueless Gas Fire can be found below.
| Model | Perception 4260 |
| Heater Type | Gas - Flueless Gas Fire |
| Direct Heat Output | 2.5kW |
| Useful Energy Efficiency | 100% |
| Control | Manual / Slide / Remote |
| Minimum Room Size | 30m³ |
| Air Vent Required | Yes (minimum 100cm²) |
| Thermostat | Yes |
| Catalytic Converter | Yes |
| Fuel Effect | Pebble |
| Style | Inset (Freestanding using optional spacer) |
| Warranty | 1 Year |
The dimensions (width, height, depth) of the Burley Perception 4260 Flueless Gas Fire are listed here.
| Burley Perception | Width | Height | Depth |
| Overall Dimensions | 518mm
(20½") | 612mm
(24") | 240mm
(9½") |
| Inset Dimensions | 387mm
(15¼") | 551mm
(21¾") | 95mm*
(3¾") |
*Optional spacer frame allows for freestanding installation without the need to inset
Please note: Due to rising freight charges, we are now being forced to charge extra for delivery to certain Scottish postcodes.
Burley flueless gas fires such as the Perception 4260 will be delivered using a Premier courier service. You will be contacted prior to delivery to book-in a suitable date shortly after placing an order.
Current delivery times for the Burley Perception 4260 is approximately 3 working days however, this is dependant on stock levels at time of placing an order. Once an order is placed, we will contact you to advise if there is likely to be any delays on the estimated delivery time.
Returns information
We understand that from time to time some of our customers may change their mind or simply not be pleased with their chosen products once delivered and/or installed. Our returns policy should hopefully help with the process of returning your order in this instance. Please feel free to contact us should you have any further queries.
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)